DTC SOL8SDR-H2 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan DTC SOL8SDR-H2. DTC SOL8SDR-H2 4 halaman.

Halaman Cetak
Revision: 1.0
SOL8SDR-H2 Quick Start Guide
Initial Communications
DTC's Node Finder application can be used to identify all DTC device Ethernet IP addresses
connected on a network.
The default setting requires the device to be connected by Ethernet to a DHCP server which will
automatically allocate an IP address. If a DHCP server is not available or the SDR is connected
directly to a PC, the SDR and PC IPv4 address will need to be configured to be on the same subnet.
Right-click the SDR on Node Finder to reconfigure the IP settings as needed.
When the SDR IP address has been established, open a web browser, and enter it in the address bar.
On authentication, leave the Username blank and enter the Password as Eastwood.
Copyright © 2023 Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 3
Commercial in Confidence