DTC SOL8SDR2X2W-P Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan DTC SOL8SDR2X2W-P. DTC SOL8SDR2X2W-P 3 halaman.

Revision: 2.0

Overview

This quick start guide provides instructions and diagrams describing how to quickly connect and

configure the SOL8SDR2x2W-P device to join a Mesh network.

Note: If configuring as a SOL-TX or SOL-RX, please refer to the relevant user guides.

Supporting software applications and detailed user guides can be downloaded from DTC's WatchDox

facility. Please contact the DTC support team:



Phone US: +1 571 563 7077



Phone UK: +44 1489 884 550



Email US:



Email ROW:

Connections

The minimum connections required for an SDR2x2W-P to join a Mesh network are power and

antennas. An Ethernet connection to a PC is required for initial configuration.

Note: CA3172 PSU or CA0002 connected to an 8-18VDC power source can be used as power

options.

Depending on how the SDR2x2W-P is to be deployed, a video source, audio headset, or serial data

connections may be attached for additional functionality. Please refer to the user guides for details.

Note: The cables in the image below are provided for illustration, a full list of cable options can be

found in the datasheet or user guide.

SOL8SDR2x2W-P Quick Start Guide

Commercial in Confidence

(no restricted content)

Page 1