bouncepad VESA Petunjuk Perakitan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Aksesori Komputer bouncepad VESA. bouncepad VESA 2 halaman.

* we recommend holding the Tablet within the

Bouncepad Case during application and removal of the

Faceplate.

Locate and lock the Faceplate onto

the Bouncepad Case. We recommend

recording the Bouncepad key number

4x Tablet Supports

1x Cable Clip

4x Corner Pieces

Install the Tablet Setup Kit. Each

kit is specific per tablet device and

Bouncepad Case.

*Bouncepad VESA mount is compatible with 75x75mm

and 100x100mm VESA mounting configurations.

* Bouncepad VESA to third party VESA mount fixings

not provided. Image shown for illustrative purposes &

may bare zero resemblance to fixings specified for your

VESA mount. Refer to specifications provided by the

third party VESA mount for the recommended fixings.

Secure the Bouncepad VESA mount to

VESA mounting bracket

Feed the tablet cable through the

Case. Connect it to its power supply.

Install your tablet into the case.

Case Washer

M4 Button-head screw

T20 Driverbit

M4 Split Washer

Attach the Bouncepad Case to the

Mounting Arm. Take care to ensure

correct & full thread engagement.

* we recommend holding the Tablet within the

Bouncepad Case during application and removal of the

Faceplate.

Locate & lock the Faceplate onto the

Bouncepad Case. We recommend

recording the Bouncepad key number.