dtec GJD 350 Panduan Instalasi & Pengaturan - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi & Pengaturan untuk Sensor Keamanan dtec GJD 350. dtec GJD 350 12 halaman.

Installation & Set Up Guide

Stage 1 –

fig. 1

During installation the electronics must be protected against water, as trapped

moisture can affect or damage the unit.

1) Using the template provided drill the wall to accept the two fixing screws, the

cable entry and the tamper cup (if used).

See fig. 1 and 2.

Note: We recommend using the tamper cup on uneven wall surfaces.

2) Remove the cover assembly by loosening the locking screw using the allen key

provided. The cover hinges from the top and lifts out of the location slot.

See fig. 3.

fig. 2

Mounting the unit

Template

Optional for Tamper Cup

Cable Holes

fig. 3