ADDCOM ADD-685 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headset ADDCOM ADD-685. ADDCOM ADD-685 18 halaman. Dect headset with usb

12. trouBlesHooting

12.1 Can not hear a dial tone
Check the PC/TEL button (10). TEL Mode: PC/TEL indicator – 'OFF'
Check the cable connections between the Headset Base and Phone.
Check that the power adapter is plugged in to the DC jack (6) on the base unit and a
wall socket and switched on.
Check the compatibility switch (13). Adjust compatibility switch (1 or 2) until you can hear
the dial tone.
12.2 microphone volume (tX) is low / dead
Make sure that the microphone (TX) mute function (11 or 15) is deactivated.
Check the position of the boom arm and make sure that the microphone is placed the
correct distance to your mouth (approximately two fingers distance). Adjust the micro-
phone (TX) volume (12) on the bottom of base unit.
12.3 Buzzing sound on the headset
Telephone may not be fully immune to the radio transmission between your headset and
base. To overcome this problem, move the base unit to at least 30 cm/12" away from the
phone.
12.4 Headset echoes
Adjust the telephone's volume. If necessary, adjust your microphone volume on the
headset (12) to a lower setting.
12.5 eHs doesn't work with the telephone
Make sure the telephone is compatible with the wireless headset. Please refer to the
complete EHS guide on our website: www.addcom.com
12.6 Headset was working, but it has stopped
Headset may need pairing to the base again. Refer to section 7 in this guide.
Headset battery may be dead. Return the headset to the cradle on the base unit for
charging.