Addendum DES-3205 Panduan Tambahan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Beralih Addendum DES-3205. Addendum DES-3205 5 halaman. D-link des-3205: supplementary guide

Halaman Cetak

1. Press the Tab key until you are at the "Filtering Data Base"

selection of the main menu. Press the Enter key and the

Filtering Data Base Menu appears:

2. The Tab key moves the highlighting down from field to field;

while, the Backspace key moves the highlighting up from

field to field. Also, the up and down arrow keys moves the

highlighting and cursor up and down as appropriate.

3. Move the highlighting to the Port Number field and type in

the desired port you are willing to set. Press the Tab key.

Note that the Filter State automatically changes to "Disable"

and all MAC addresses are cleared and ready for your input.

4. Move the highlighting to the Filter State field and toggle

between either "Disable, Forwarding or Blocking."

toggle within this field, you must use the Space bar.

5. Move the highlighting from the 1

type in the desired MAC address, then continue this

procedure to the 16

6. Press the F2 or S keys to save the input. Note that the

Switch must be reset in order for changes to take effect.

MAC address field and

MAC address field.