ATV VD650WDR Buku Petunjuk - Halaman 13
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kamera Keamanan ATV VD650WDR. ATV VD650WDR 18 halaman.
Halaman Cetak
Use the Up and Down buttons adjust to digital tilt
Press the Enter button to exit.
PT Reset(Pan & Tilt Reset) : Press the
4) Freeze : Select the still mode on/off
5) Frame Control: Select term of refres
reduce the recording to data storage.
Func : Select frame control mod
Auto mode : When motion is not detected, output
in configured interval. And when the motion is detected, output video is
switched to real time video.
ON : Always refresh in confi
OFF : Always real time video.
Renewal(sec) : Select an interval betw
When object start moving, The output video possible to cut a little time.
6) ScnChg/Unfoc : Select scene change/unfocus detection On/Off .
Inform that whether scene have been changed or not. Detect b
changing in the watching scene (Spray, Screen Camera, Changing Scene
This function is linked with alarm out
In low luminance environment, the accuracy is down of the result.
In very low luminance environment, operation is not be performed.
It is not be performed when moving object is exist.
<System Setup>
1) Cam Info : Camera ba sic information display
Cam ID/Baud rate/Protocol/Firmware Ver./
2) General Setup
System Lock
When system lock is set to "L
password to enter OSD menu.
Default password is "0000".
Change PID : Change the administrator's password
Move cursor with OSD Key and Press Enter t
Comm(RS 485 Communication) : Press the Enter button to access the Com
Cam ID : Select the camera ID (001 - 255).
: Configuration Lock.
Enter button to reset digital pan and tilt.
h rate for output video. This function is useful to
e to ON/OFF, and Auto.
gured interval.
een two frame.
CCD Type/Lens Type
ock", User must to input 4-character
13
video is being refresh
reaking or
o input the character.
...)
m.