AtVideo DR-6232H Panduan Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Cepat untuk DVR AtVideo DR-6232H. AtVideo DR-6232H 15 halaman. Hybrid network video recorder

Halaman Cetak

Camera Registration

Once Network Setup Wizard is complete, 16-channel analog
cameras are automatically registered and click the "Scan"
button to scan for network cameras connected to NVR. Also
you can delete and register cameras.
Device Scan
Click the "Scan" button and the Device Scan screen
Some functions may not be supported for the third
party cameras depending on their protocol and moel.
● Protocol: Select the protocol used by the camera (for video
encoder) you wish to search for.
8
Even if the network device uses a protocol
supported by the NVR, the device itself may not
be visible for scanning and registration by the
NVR. For more information about supported
network devices and models, contact your
retailer.
● Mode: Select the scan mode.
1 Mac Address: Displays the last 6 digits of the camera's
MAC address.
2 Address: Indicates the camera's searched IP address.
3 Model: Indicates the network camera's model or "analog"
if they are the analog cameras.
4 Name: Indicates the camera's name.
5 Status: Identifies the camera's registration status
"registered" or "not registered. "
Advanced Setup: Video In IP Setup
If the camera is networked but not scanned, use this setup.
This setup allows you to change the network setting
of the NVR's VIDEO IN port which is camera's network
environment. Check the camera's network setting first
before you use this setup.
Make sure that this setting does not conflict with
the WAN setting. For more information on the WAN
setting, refer to the operation manual.
1
Select Scan to commence scanning.
Only cameras that are connected to the NVR via
VIDEO IN ports can be scanned and registered.
2
Select a camera from the scan list and then select Add
Camera. The device login window will appear.
3
Enter a User ID and a Password for the selected
camera.
- Apply to All Devices:
and password to all selected devices if you selected more
than one device and the selected devices have the same
user ID and password.
Selects to apply the same user