AddEnergie SmartDC Panduan Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengisi Daya Baterai AddEnergie SmartDC. AddEnergie SmartDC 15 halaman. V2

Specifications

Specifications:

Type of charging station: Direct-current fast charging station

Output connector: Conforms to the CHAdeMO and SAE J1772 Combo standards

Input connector: Screw type distribution bloc, 350 MCM max . (for the phases), 3/0 max . (for the neutral)

Nominal voltage supply: Three-phase 480Y/277V (must be protected by a 100A, three-phase over-

current protection device .)

Maximum power consumption: 54kVA @ three-phase 480V

Maximum output power: 50kW @ 400V

Efficiency: 93% (or better) @ 50kW output

Power Factor: 0 .98 or better

The charging station is a non linear load . The use of a transformer having a K-factor of at least 9 is

recommended .

Integrated Protection:

• Against voltage surges

• Electric current leakages to ground

• Isolation failures between the AC input and DC output

Operating Temperature: -40°C to +50°C

Casing: Conforms to the NEMA 3R standards for exterior use

Weight at delivery: Approximately 250kg

Security standards compliance:

• UL 2002: Charging system for electric vehicles

• CSA 22 .2 No . 107 .1-01: general power supply

• TIL I-44: Requires interim certification for charging stations designed for electric vehicles of less than

600 Volts

Model: SmartDC

Revision: V2

Company Info: AddEnergie Technologies Inc .

Document revision number: V05-2017-04-10

is protected by copyright laws of many countries and should not be

modified, reproduced or distributed without the prior written consent of

AddÉnergie Technologies .