Comtek BST-25 Panduan Operator - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemancar Comtek BST-25. Comtek BST-25 19 halaman. 216 mhz synthesized base station transmitter
Halaman CetakOPERATING INSTRUCTIONS
(continued)
To avoid this type of interference, select frequencies from one
of the standard groups (see frequency group charts on page 11), or
use COMTEK's frequency selection guide software to determine
appropriate frequencies. (Contact COMTEK to obtain a free
copy of the frequency selection software.)
Test Tone
The BST-25 base station transmitter has an internal 400 Hz source
which is transmitted when the "TONE" switch is enabled.
This source is intended to be used to make technical adjustments
and to verify the operation of the system. Under normal
operation the "TONE" switch should be disabled.
Speech EQ
On the back of the transmitter there is a switch labeled "EQ". With
this function enabled (switch up), the audio dynamics and frequency
response are processed to improve intelligibility of speech. If the
primary audio source is going to be speech, you should enable this
processing. If the main audio source is going to include music in-
formation, you should disable it. You may want to experiment to
determine which position sounds most pleasing with the program
source you intend to use.
Page 6