ATZ HDMI-444MPR-TW Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Pengalih Matriks ATZ HDMI-444MPR-TW. ATZ HDMI-444MPR-TW 19 halaman. 4x4 hdmi 1.4 seamless matrix switch supports pip/pop/video wall supports mixed inputs

Halaman Cetak

Model

: ATZ HDMI-444MPR-TW

Description: 4X4 HDMI 1.4 SEAMLESS Matrix Switch supports PIP/POP/Video Wall

Supports mixed inputs

7. IR Control system

At Matrix end: Insert the 3.5mm jacks of the IR TX Emitters included with the unit into

the IR TX Emitter ports at the rear of the matrix according to input. The IR signal is

added to the HDMI of the input device so, for example, if the user is watching Blu-ray on

input 1, the IR signal will be directed through the IR TX1 socket to control the device.

As each IR TX port is allocated to an individual HDMI input port, if the user is unable to

establish IR control of the device, care should be taken to check firstly, that the IR

emitter and HDMI input ports match (Input 1-TX1, Input2-TX2 etc.) with plugs secured

in correct ports, and secondly, that the IR TX emitter sensors are firmly attached directly

to the front of inputs and covering infrared sensor windows of the source devices.Some

later adjustment may be needed to the location of the sensor to achieve the best

performance results - sometimes moving the sensor to different areas on the source can

improve IR performance.

NOTE: Infrared receiving areas of devices can be located by shining a flashlight onto the

front of the device – the sensor should be able to be seen through the plastic as a small,

round object inside.Insert 3.5mm jacks of IR RX receivers into RX ports, making sure

the receivers themselves are placed in clear view to receive an infrared signal from the

remote handset used to control the display outputs.

pg. 9

All specifications are subject to change without prior notice.