Comtrend Corporation WAP-EN1750R Panduan Instalasi Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Titik Akses Nirkabel Comtrend Corporation WAP-EN1750R. Comtrend Corporation WAP-EN1750R 14 halaman. Outdoor
Halaman Cetak
I-5.
Reset
If you experience problems with your access point, you can reset
the device back to its factory settings. This resets all settings back
to default.
1. Press and hold the reset button on the access point for at least
10 seconds then release the button.
You may need to use a wrench to open the weather
proof cover to access the reset button.
2. Wait for the access point to restart. The access point is ready for
setup when the LED is green.
I-6.
Mounting the Access Point to a Wall or Pole
The access point includes wall / pole mounts which require some
assembly.
1. Attach the wall mount bracket to the back of the access point
using M6x12 screws and washers, as shown below.
Ensure your access point is securely attached to the wall
mount bracket.
4