Comtrol RocketLinx ES8108 Panduan Pengguna - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Comtrol RocketLinx ES8108. Comtrol RocketLinx ES8108 20 halaman. Industrial
Juga untuk Comtrol RocketLinx ES8108: Panduan Instalasi Cepat (6 halaman), Panduan Instalasi Cepat (8 halaman), Panduan Instalasi Cepat (8 halaman)
Halaman Cetak
Troubleshooting and Technical Support
Troubleshooting
If you are having problems, you may want to check the following:
•
Make sure you are using the correct DC power supplies (12 to 48VDC). Do not use power supplies with DC output over
48VDC.
•
Select Ethernet cables with specifications suitable for your applications to set up your systems.
Ethernet cables are categorized into unshielded twisted-pair (UTP) and shielded twisted-pair (STP) cables.
Category 3, 4, 5, and 6 Ethernet cables are suitable for systems with 10 Mbps transmission speed.
For systems with 100 Mbps transmission speed, Category 5 and 6 Ethernet cables are the only suitable specifications for
this environment.
You also need to make sure that the distance between any two nodes does not exceed 100 meters (328 feet).
•
If the Power LEDs go off when the power cord is plugged in, a power failure might have occurred. Check the power
output connection to see if there is any error at the power source. If you still cannot solve the problem, contact Comtrol
Technical Support for assistance.
Comtrol Support
You can use one of the following methods to contact Comtrol.
Contact Method
Support
Downloads
Web Site
Phone
Troubleshooting and Technical Support
Web Address or Phone Number
http://www.comtrol.com/pub/en/support
ftp://ftp.comtrol.com/html/ES8108.htm
http://www.comtrol.com
763.494.4100
RocketLinx ES8108/ES8108F User Guide: 2000514 Rev. B - 17