Comtrue CT-7301 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Unit Kontrol Comtrue CT-7301. Comtrue CT-7301 12 halaman.

Comtrue Inc.

Pin Name

Output Frequency control:

If the SRC mode is enabled, the output frequency is controlled by

OUT_FREQ[3:0]. OUT_FREQ[3:0] value could be modified by Jumper J25.

If the SRC mode is mode 0, 1 and 2, the external Fs/Mclk signal should be

connect to ASRC_FSIN pin (J5).

S/W control

This demo board has a MCU slot and an external S/W control port (J26). You

could put the Arduino Nano on the MCU slot to access CT7301. CT7301 also

could be controlled by the external MCU via the external S/W control port.

Version 0.9

Description

11 = 0x26

connect the upper two pins = 1

connect the lower two pins = 0

Function Table

- 6 -

CT-7301 demo board manual

11/17/2014