2bfirst Battwatch 1000 Panduan Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Aksesori Mobil 2bfirst Battwatch 1000. 2bfirst Battwatch 1000 20 halaman. The ultimate car power supply monitoring system

The hinged holder makes it possible for the B
the driver.

Permanent installation:

Customers who don't wish to use the device through the cigarette lighter have the option of installing the B
permanently. To do so, the plug of the B
watch
that are now available have to be connected to a live cable at a suitable spot behind the dashboard. Here it is
important to make sure that no voltage is transmitted at the selected location when the ignition is turned off. We
recommend that this permanent installation is only carried out by a specialist. (Plus cable: On closer inspection,
small numbers and English text can be seen on this cable. Minus cable: There are dotted lines on this one.)
NOTE:
To ensure that the status monitoring of the battery charging system is carried out with high precision, we recom-
mend that the B
attwatch
NOTE:
The LED display of the B
mal.
PLEASE NOTE:
In most vehicles there is no longer a charge in the cigarette lighter once the ignition is turned off. For that reason
the B
can also remain in the cigarette lighter when the vehicle is parked. But in a few vehicle models
attwatch
the cigarette lighter carries a charge even when the ignition is turned off. In that case, the display does not shut
off when the ignition is switched off; with these vehicles we recommend that the B
cigarette lighter upon leaving the vehicle.
3. LED display, display symbols and operating buttons (illustr. 2)
(1) The B
has four display symbols for the status of the vehicle's energy system:
attwatch
● Chg
(2) The display of the B
the interior temperature of the vehicle in Centigrade (or Fahrenheit).
(3) The "MODE" button serves for the selection of the desired category (voltage / interior temperature °C/°F)
to be displayed. The different display categories can be selected sequentially through a repeated pressing of
the "MODE" button.
(4) Illuminated display of whether the selected interior temperature is shown in
Centigrade or Fahrenheit.
(5) In situations that may lead to an imminent breakdown, a shrill alarm signal will sound. The driver can switch
off the pervasive beeping sounds by pressing the "MUTE" button so as not to be distracted from traffic.
INFORMATION FOR USERS OF THE MODEL B
The B
1000 (illustr. 3) has no display to indicate the voltage or the interior temperature. But the four
attwatch
display symbols
● Chg
are identical with that of the model B
tions in the following chapters 4 to 7 correspond to the functionality of the B
The function of the "MUTE" button is identical to the functionality of model B
The "MODE" button is only significant if there is a flaw in the device (in a guarantee case). The button is pro-
grammed to have no function for the user himself.

4. Checking the battery status

NOTE:
Please check the battery status only with a cold engine, since a precise analysis of the battery quality can only be
carried out under that condition. The engine should have been non-operational for at least one hour.
Connect the B
attwatch
Switch on the low beams and turn off all other consumers (heated seats, blower, etc.). After about 10 seconds,
the B
shows the user the current battery status. The B
attwatch
or battery charge levels:
4
attwatch
attwatch
is not connected to a multiple outlet.
generates some warmth. Therefore a slight warming of the B
attwatch
● OK
● LOW
can show the current voltage or alternatively
attwatch
attwatch
● OK
● LOW
2000 that is depicted in these operating instructions. All explana-
attwatch
to the cigarette lighter. Only then turn on the ignition, but don't start the engine yet.
to be positioned at a viewing angle that is preferable to
has to be removed first and the two plus and minus cables
● X
1000:
● X
attwatch
attwatch
can show three different battery qualities
attwatch
is nor-
attwatch
is removed from the
attwatch
1000.
2000.
-
att