daltile DAD2 Panduan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Bor daltile DAD2. daltile DAD2 12 halaman. Angular tile drill
Juga untuk daltile DAD2: Panduan Pengoperasian (12 halaman)

Halaman Cetak

The use of saws and drills generates dust. Excessive airborne particles may cause irritation to

eyes, skin and the respiratory tract. To avoid breathing impairment, always us dust controls and

protection suitable to the material being sawed or drilled;

See OSHA (19 CFR Part 1910.1200). Diamond Blades improperly used are dangerous. Comply

with American National Standards Institute Safety Code, B7.1 and, Occupational Safety and

Health Act covering speed, Safety Guards, Flanges, Mounting Procedures, General Operating

Rules, Handling, Storage and General Machine Conditions.

CALIFORNIA PROPOSITION 65 MESSAGE:

Some dust created by power sanding, sawing, grinding and other construction activities contain

chemicals known [to the State of California] to cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

Lead, from lead-based paints

●

Crystalline silica, from bricks and cement and other masonry products

●

Arsenic and chromium, from chemically treated lumber

●

For Further information, consult the following sources:

http://www.osha-slc.gov/sltc/sillicarystalline/index.html

http://www.oehha.org/prop65/out_of_date/6022kLstA.html

Your risk from these exposures varies depending on how often you do this type of work. To

reduce your exposure to these chemicals, work in a well-ventilated area, and work with appro-

ved safety equipment, such as dust masks that are specially designed to filter out microscopic

particles.

TILE DRILL SPECIFIC WARNINGS:

Do not touch the diamond bit during operation.

●

Do not leave the machine turned "ON" when not in use.

●

Unplug the machine before changing tools or performing maintenance.

●

Always use coolant water.

●

PAGE 8 DALTOOL DAD2 OPERATING MANUAL V10/2007R1

DALTOOL

SAFETY