Conairphone CID154 Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Telepon Tanpa Kabel Conairphone CID154. Conairphone CID154 7 halaman. Call waiting/caller id sport telephone

Halaman Cetak

BASIC MEMORY PROGRAMMING

The CID154 comes with 10-memory dialing.

NOTE: Your local phone company restricts the time you can

have the handset off the base (off-hook).

Pick up the handset, and press

[STORE] to enter memory store.

Press the keypad to enter the number that you want to program.

The LCD on the back of the handset confirms the numbers you

entered.

Press [STORE]. The 'MEM' will be

displayed on the right corner of LCD.

Press the memory location (0 to 9) on the keypad. The LCD will

then return to the off-hook status.

Copy from the Caller ID to Telephone Memory

Pick up the handset, press [ ] or [ ] until the Caller ID memory

location to be copied appears on the LCD. Press [STORE] twice

to enter memory store. The 'MEM' will be displayed on the right

corner.

Press the memory location (0 to 9) on the keypad. The LCD will

then return to the off-hook status.

If no key is pressed within 8 seconds, the LCD will return to the

off-hook status.

Repeat the above steps to store a different number in the same

speed dial location, or to store a new number in a different speed

dial location.

NOTES:

• Pressing [REDIAL] will place a 4-second PAUSE into the

number. Which may be required for accessing special phone

services.

• You can store a number with up to 16 digits maximum. Only

the last 14 digits will be displayed.

MEMORY DIALING

Pick up the handset to make your call.

Press [MEM] [0] ... [MEM] [9] for one of the 10 memory locations

to be dialed.

CALLER ID OPERATION

NOTE: The unit displays caller ID information if you have

subscribed this service.

If an incorrect, invalid or incomplete

Caller ID signal is received, the LCD

shows '-LINE ERROR-'.

If only the caller's phone number is

received, the LCD shows the caller's

phone number with the time and date it

was received. The 'NEW' icon turns on

and New Call LED blinks.

If both the caller's name and phone

number are received, the LCD shows

the caller's name and phone number,

with the time and date it was received.

The 'NEW' icon turns on and NEW CALL LED blinks.

If the name and number are not

available due to the caller's restriction,

the LCD shows '-PRIVATE CALL-' with

the time and date received. The 'NEW'

icon turns on and New Call LED blinks.

If the name and number are not

available, the LCD will show '-

UNAVAILABLE-' with the call's time and

date. The 'NEW' icon turns on and New

Call LED blinks.

If no key is pressed within 20 seconds,

the LCD will show the 'Answer-Ready'

mode, and display the total call counter,

new call counter, current time and date.

Receiving Call Waiting Caller ID

When you are on an existing phone call, your CID154 will display

incoming call waiting Caller ID information.

1. You will hear a beep and the telephone will be muted

momentarily while the LCD display shows the Caller ID

information of the second caller.

2. The NEW CALL LED indicator and

"CALL WAITING" icon will flash.

3. When you press the [FLASH] button

or hook switch to access the call waiting call, the LCD will

display the talk timer.

IMPORTANT:

You must subscribe to call waiting Caller ID service from your

local telephone company in order to receive call information.

VIEW THE CALLER ID MEMORY

If you have new calls ('NEW' icon and New Call LED is lit). Press

[ ] or [ ] to read all of the most recent calls. The CALL# will

decrease.

Once all the new calls have been read, 'END OF NEW CALL'

will be displayed.

Press [ ] to view the oldest calls, or press [ ] to view the most

recent calls.

NOTE: After you view all the calls in memory, the LCD will show

'END OF LIST'.

NOTES:

1. The New Call LED will blink until all the new Caller ID data

has been reviewed.

2. If the 'RPT' icon is turned on, you have received multiple NEW

calls from the same number.

3. If you receive a call from a number stored in (previously

reviewed) memory, the data in memory will be replaced with

the new call's time and date and the 'NEW' icon will be turned

on.

If no key is pressed within 15 seconds, the LCD will show the

'Answer-Ready' mode, and display the total call counter, new

call counter, current time and date.