Conairphone TAD2018 Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mesin Penjawab Conairphone TAD2018. Conairphone TAD2018 17 halaman. Callkeeper digital answering system

Halaman Cetak

Recording Your Greeting (Cont.)

To record your own personalized outgoing

greeting:

1. Press and hold down the

GREETING button.

2. After you hear one beep tone, speak

clearly towards the built in microphone.

You have a maximum of 30 seconds to

record your GREETING.

3. When finished, release button.

Note: You have 30 seconds recording

time for your outgoing message. If your

unit beeps while you are recording, you

have exceeded the time limit. Record a

shorter outgoing message.

Sample Message:

"Hello, this is

I can't come to the phone right now,

please leave your name and phone

number after the beep. You will have 45

seconds to leave your message. Thank

you for calling."

Checking Your Greeting Message

1. Press the Greeting control once quickly.

2. Your Greeting will play back and your

system will reset to answer incoming

calls.

Volume Control

Use the VOLUME Control on the side of

your unit to set the speaker to the desired

sound level.

Setting the Voice

Time/Day Stamp

NOTE: When setting the Time/Day

Stamp, do not allow more than 20 seconds

to go by in between any steps. If you do

not set the Time/Day Stamp, your unit

will sound a beep after each message.

Day Set

1. Press and hold the REPEAT button for

about 2 seconds. The unit will say "Time

Is Not Set" then "Monday, 12:00 AM".

2. Press and hold the ON/OFF button to

advance the days "Tuesday", etc... until

you hear the correct day.

3. Release the ON/OFF button. To return

to the previous day, press the PLAY

button.

Time Set / Hour Set

1. After the day is set, press the REPEAT

button to set the hour. The unit will say

"Twelve".

2. Press and hold the ON/OFF button. The

unit will prompt the hours "One, Two,

Three, etc..." until the button is released.

If you need to go back to the previous

hour, press the PLAY button to bring you

backwards.

Minute Set

1. After the hour is set, press the REPEAT

button. The unit will say the minutes

beginning with "0 (which sounds like

"oh").

2. Press and hold the ON/OFF button. The

unit will prompt the minutes "01, 02, 03,

etc..." until the button is released. Press

the PLAY button to go backwards.