DAN DRYER 4002 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengering DAN DRYER 4002. DAN DRYER 4002 10 halaman.

WARM AIR SPEED ADJUSTMENT

• Switch off the power and remove the cover.

• Use Phillips screwdriver or flat notch.

The air speed is adjusted on the VR potentiometer.

Clockwise to increase air speed(+).

Counterclockwise to decrease air speed(-).

• Switch off the power and remove the cover.

• The heating element switch is located on the timer.

Adjust with a flat screwdriver:

• Slide switch to "ON" = heating element on.

• Slide switch to "1" = heating element off.

SENSOR RANGE ADJUSTMENT

• The sensor range is adjustable between 100mm and 230mm.

Standard range 130mm ± 20mm.

• Clockwise: To increase sensor activation range (+)

• Counterclockwise: To decrease sensor activation range (-)

• The sensor activation range should be adjusted to its environments,

e.g. light and distance to the bottom of the sink.

Note: Do not overturn the sensivity adjustment.