3onedata ES2010G-2GF Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Jaringan 3onedata ES2010G-2GF. 3onedata ES2010G-2GF 4 halaman. Full gigabit ethernet switch
Halaman Cetak
1. DIP Switch
2. Power input terminal block (4 bits)
3. Ground screw
4. DIN-Rail mounting kit
5. 1000Base-FX fiber port
6. Power indicator
7. 10Base-T /100Base-TX/1000Base-TX Ethernet port
8. Gigabit Ethernet port indicator
【Dimension】
Unit (mm)
【Power supply input】
The Ethernet switch provided 4 bit power supply input terminal
block, support DC input. DC power supply input supported
redundancy function, provided PWR1 and PWR2 power input,
can use for single, and can connect 2 separately power supply
system, use 1 pair terminal block connect the device at the same
time. If one of the power systems broke, the device can work
un-interruptible.
Built-in
overcorrect
connection protection. Voltage input range is 12 ～ 48VDC
(terminal block defined as: V1-、V1+、V2-、V2+).
【DIP switch】
The switch provided 4 bits DIP switch to do function configure
(ON is enable), 1 is flow control, 2 is fiber port trunking, 3 is port
isolation, 4 is keep for future function.
【Communication connector】
10/100/1000BaseT(X) Ethernet port
The pinout of RJ45 port display as below, connect by UTP or STP.
The connect distance is no more than 100m. 1000Mbps is used
120Ω of UTP 5e; 100Mbps is used 120Ω of UTP 5; 10Mbps is
used 120Ω of UTP 3, 4, 5.
RJ 45 port support automatic MDI/MDI-X operation. That can
connect the PC, Server, Converter and HUB. Pin 1, 2, 3, 4, 5, 6, 7,
8 Corresponding connections in MDI. 1→3, 2→6, 3→1, 4→7,
5→8, 6→2, 7→4, 8→5, are used as cross wiring in the MDI-X
port of Converter and HUB. In MDI/MDI-X, 100/1000Base-TX
PIN defines is as follows:
1
8
protection,
Reverse
Note：10Base-T/100Base-TX, "TX±"transmit data±, "RX±"receive data±,
"—"not use.
PIN
MDI
MDI-X
1
BI_DA+/TX+
BI_DB+/RX+
2
BI_DA-/TX-
BI_DB-/RX-
3
BI_DB+/RX+
BI_DA+/TX+
4
BI_DC+/—
BI_DD+/—
5
BI_DC-/—
BI_DD-/—
6
BI_DB-/RX-
BI_DA-/TX-
7
BI_DD+/—
BI_DC+/—
8
BI_DD-/—
BI_DC-/—
- 2 -
Gigabit MDI (straight-through cable)
Gigabit MDI-X (Cross over cable)
MDI/MDI-X auto connection makes switch easy to use for
customers without considering the type of network cable.
1000Base-X SC/ST/FC port
1000Base-X port support full-duplex SC/ST/FC Multi mode
or Single mode.