2Box Drumit Three Panduan Memulai Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Drum 2Box Drumit Three. 2Box Drumit Three 20 halaman.

Renaming a KIT

To rename a KIT, press the button above SAVE on the KIT home page.

You can use uppercase and lowercase letters, numbers as well as several special

characters for the names you enter. Use the knob to select the desired character

(KEY flashes) or hold down the MORE button while pressing the knob to insert a

space. Press the knob without holding down the MORE button to select the CUR

parameter. Now, the knob can be used to move the flashing underline cursor to

another position you want to edit.

Holding down the MORE button while rotating the knob towards the right allows you

to insert new spaces. Rotating it to the left in this state deletes the character at the

cursor position. To confirm the name, press the leftmost DATA button above the

display (SAVE).

Copying, Moving and Swapping KITs

Existing KITs can be moved (MOVE) to a different memory slot, swapped with other

KITs (SWAP) and copied (COPY).

Start by pressing the leftmost button above the display.

Rotate the knob to select the number of the KIT that should act as target for the

currently selected KIT. After specifying the new KIT number, you can select among

three functions: COPY, MOVE and SWAP.

Pressing the leftmost DATA button allows you to copy the selected KIT to the target

memory. MOVE allows you to move the KIT towards the target memory (the KITs at

and behind this position move one slot). SWAP, finally, causes the two selected

KITs to change places. In this example, KIT no. 1 moves to memory 80, while the

settings of KIT no. 80 move to memory location 1.

8 / 20