AnyFit PS05 Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Kebugaran AnyFit PS05. AnyFit PS05 12 halaman.

Measurement Guide

Cross Recessed Pan Head Tapping Screw

Hex Socket Set Screw with Flat Point

Flat Head Cap Screw

Button Head Cap Screw

Socket Head Cap Bolt

Hex Bolt

Assembly of the equipment takes professional installers about 2

hours. If this is the first time you have assembled this type of

equipment, plan to spend more time. It is strongly recommended

to assembly the equipment by professional installers. You may

find it quicker, safer, and easier to assemble this equipment with

the help of a friend, as some of components may be large, heavy

or awkward to handle alone. It is important that you assemble

your product in a clean, clear, uncluttered area. This will enable

you to move around the product while you are fitting

components and reduce the possibility of injury during assembly.

Note: As with any assembled part, proper alignment and

adjustment is critical. While tightening the fasteners, be sure to

leave room for adjustments. Do not fully tighten the fasteners

until instructed to do so. Be careful to assemble the components

in the sequence presented in this guide.