AnyFit PS06 Manual - Halaman 8
Jelajahi secara online atau unduh pdf Manual untuk Peralatan Kebugaran AnyFit PS06. AnyFit PS06 12 halaman. Abdominal / back extension
Halaman Cetak
Assembly
Step 1
1. Attach 1×Bottom Connecting Tube Welding(#13) to Weight Frame Assembly(#1),
using:
4×Hex Head Bolt M12X85(#61)
4×Nut M12(#68)
2. Attach 1×Wheel Plate Frame(#3) to Bottom Connecting Tube Welding(#13), using:
2×Hex Head Bolt M12X105(#62)
4×Nut M12(#68)
3. Attach 1×Main Frame Assembly(#2) to Bottom Connecting Tube Welding(#13), using:
2×Hex Head Bolt M12X35(#60)
4. Attach 1×Upper Connecting Tube Welding(#11) to Weight Frame Assembly(#1),
Wheel Plate Frame(#3) and Main Frame Assembly(#2), using:
2×Hex Head Bolt M12X35(#60)
2×Flat WasherΦ13×Φ24×2(#50)
Notice: Fasten Bolts According to Assembly Requirement.
1
68
50
50
68 50
11
8×Flat WasherΦ13×Φ24×2(#50)
8×Flat WasherΦ13×Φ24×2(#50)
2×Flat WasherΦ13×Φ24×2(#50)
2×Nut M12(#68)
63
50
50
11
60 50
3
50
68
2
13
50
62
60 50
61
Step 2
1. Attach 1×Rotating Shaft(#20), 1×Lever Rack Frame(#4), 1×Cam Frame(#5), 1×Swing
Arm Frame(#6), 2×Bearing Sleeve(#19), 1×Bearing Cap φ65(#23), 1×Bearing Capφ
65×φ11(#24) to Wheel Plate Frame(#3), using:
1×Flat Head Cap Screw M8X20(#51)
2. Attach 1×Aluminium Pulley φ89 (#21), 1×Hollow Pulley Welding(#12), 1×Steel Cable
Spacer(#32) to Lever Rack Frame(#4), using:
1×Button Head Cap Bolt M8X45(#56)
1×Button Head Cap Bolt M10X30(#57)
1×Nut M8(#66)
Notice: Fasten Bolts According to Assembly Requirement.
24
52
3
1×Flat Head Cap Screw M10X25(#52)
2×Flat WasherΦ8.5×Φ16×1.5(#48)
2×Flat WasherΦ11XΦ20X2(#49)
66
48
21
32
48
20
12
4
56
5
6
23
51
12