Anyload OCS-2-T Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Timbangan Anyload OCS-2-T. Anyload OCS-2-T 15 halaman. High resolution digital crane scale
Halaman CetakHigh Resolution Digital Crane Scale
Display Brightness
or
to enter Display Brightness.
Press
or
Press
Display Brightness can be set to:
Dim LED brightness saves battery power dramatically.
Idle Mode Timing
or
to enter Idle Mode Timing.
Press
or
Press
Idle Mode Timing can be set to:
15
30
(15sec),
(30sec),
To maximize battery life, scale automatically enters Idle Mode,
when there's no action or the load is stable. In Idle Mode, scale
works in low‐power consumption status. Any key pressing or
motion in load wakes up scale from Idle Mode.
or
to exit User Setup.
Press
9. Battery Maintenance
To maximize battery life, please note the following battery
maintenance guide.
This scale is powered by a 6V4.0Ah rechargeable lead‐acid
battery.
Battery is permanently fixed inside battery house.
Depending on LED brightness and idle mode setting, battery
works from 60 hours to 200 hours.
In order to conserve battery life, enable Auto‐Off and Idle Mode,
dim LED brightness.
Charging time for a completely discharged battery is
and
to change brightness value.
1
2
(dim),
(normal),
and
to change timing value.
0
5
(disabled),
60
(60sec). It is 30sec by default.
User Guide
br||?
shows.
3
(bright).
idl??
shows.
10
(5sec),
(10sec),
Page 9 of 12