Conceptronic CH3B2E Manual Dasar

Jelajahi secara online atau unduh pdf Manual Dasar untuk Kandang Conceptronic CH3B2E. Conceptronic CH3B2E 10 halaman. 3.5" harddisk box dual bay

Unit assembly

First step needed it's install hard drives in your CH3B2E enclosure, to do it you can follow installation guide

that it's included in product box. If you want you can also download it from following link:

http://download.conceptronic. net/GRABNGO/CH3B2E/CH3B2E_Assembly_A4_Reverse_Pages.pdf

Getting Started

Once hard drives are connected to CH3B2E you can proceed to connect power supply and data cable, you can

select if you want connect through USB or eSATA to your computer.

NOTE: When you have connected the CH3B2E to your computer with eSATA, it is possible that the unit will

only show 1 active harddisk LED. This is caused by your eSATA controller, which cannot handle multiple SATA

harddisks on 1 connection. To solve this issue, there are multiple solutions:

A. Connect the CH3B2E to your computer by USB.

B. Configure the CH3B2E to 1 of the other harddisk configurations.

C. Replace your eSATA controller by an eSATA controller which supports multiple SATA

harddisks on 1 connection.

BASIC GUIDE FOR SETTING CH3B2E

www.conceptronic.net

Page 1 of 10