Anyload T15C-A Panduan Operator - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Operator untuk Timbangan Anyload T15C-A. Anyload T15C-A 12 halaman. Pallet jack scale
Halaman Cetak
5. Once the scale has been powered on, it will go through an LCD display test
and it is ready for use when the display shows zero.
6. The scale requires about 15 minutes warm up before operation to ensure
best accuracy.
7. Please note when the battery symbol keeps on the screen, the batteries need
to be charged
4. Operation
4.1 Features and Specifications
*Large LCD display (digit height 30mm x 13mm) with LED backlight
*Kilogram (kg) and pound (lb) weighing modes
*Application include: simple counting , hold, accumulation
*Low power indication and auto power off / auto idle
Options: RS-232 or Serial printer
Load Cells
Readability
Tare Function
Units of measurement
Power supply
Connector
4.2 Load Cell Connection
Load cell bus
Connector
Red
Yellow
Blue
Black
3 |
ANYLOAD NPS Series Pallet Jack Scale Operator's Guide (V1906) – T15E v2 series indicator
Minimum 350 ohm load cells
(Up to 4 load cells of 350 ohm)
7.4V/2500mAh Lithium Rechargeable battery or AC
J1
J2
J3
J4
Maximum 1000 ohm
Selectable, 0.0
Full
Kg , lb
adaptor 10VDC, 1000mA
4 pin d socket
Load cell wire
Red
Black
Green
White
Wire socket
E+
E-
S+
S-