Anyload PS805-B Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Anyload PS805-B. Anyload PS805-B 12 halaman. Thermal receipt printer
Never use sand paper, cutter, screw driver or any hard object to scratch the
printer head. These will permanently damage the printer head.
5.2 Cleaning the Paper Scraps
After a long period of use, paper scraps are accumulated around the printer
head area. Paper scraps left at the gears might result in damaging the gear
system therefore, regular cleaning is required.
1. Make sure the power cord and interface cables are unplugged or
disconnected
2. Use a soft brush to clean up paper scraps around the cutter blade.
3. Open the top cover and remove the paper roll from the printer.
4. Use air brush to blow away the paper scraps on the gear system. Use a soft
brush also to remove paper scraps around the printer head.
Note:
* It is recommend to do the paper scraps cleaning twice a month if printer is
using a low quality thermal paper roll and/or the printer is used very often.
5.3 Handling the Printer
Use both hand to hold the base
6.
Operating the Printer
6.1 Keys & Indicators on Front Panel
7 |
ANYLOAD PS805-B Thermal Receipt Printer User's Manual (V1906)
Never lift by holding
the top cover
Power LED
Error LED
Feed Button