Concierge ACMGWM10 Petunjuk Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Rak dan Dudukan Concierge ACMGWM10. Concierge ACMGWM10 4 halaman. 10 window mount bracket

Halaman Cetak

Step 3

Place the bracket back in the

desired location. With a marker,

mark the desired location that is

to be drilled to for the data or DC

power cable to pass through to

the display. There is a cut out on

the bracket in the middle of the 4

mounting holes. This is where the

window frame is to be drilled.

CAUTION! If the drill bit comes

in contact with the window when

drilling there is a chance the

window may be damaged.

Step 4

Using a Isopropyl wipe, clean the

window where the bracket is to

be mounted.

Peel off the adhesive tapes

protective film and carefully

place the window mount in the

desired location ensuring the

already drilled 8m hole lines up

with cut out in the bracket.

The adhesive film should now be

holding up the bracket itself.

+61 3 9012 6126

conciergedisplays.com.au



