Concoa 536 Series Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Alat Ukur Concoa 536 Series. Concoa 536 Series 20 halaman. Autoswitch systems
Juga untuk Concoa 536 Series: Panduan Petunjuk Instalasi dan Pengoperasian (17 halaman)
Halaman Cetak
3
PROBLEM: At least one autoswitch or secondary remote alarm component is working; however, one or
more other autoswitches or secondary remote alarm components are not working:
SOLUTION:
With the power switch "off " on the 529 5298 or 529 5305 remote alarm, check the wiring to the malfunc-
tioning components. Correct the wiring.
4. PROBLEM: The 529 5298 or 529 5300 remote alarm power LED and the autoswitch power LED is on;
however, the 529 5305 secondary remote alarm power LED is not lit:
SOLUTION:
Move the power switch on the 529 5298 or 529 5305 remote alarm to the off position (down), and discon-
nect the power source and . Correct any improperly wired connections from the remote alarm to the
secondary remote alarm. Turn on the power switch. If the secondary remote alarm LED does not illumi-
nate, check the secondary remote alarm fuse by following these steps. Move the power switch on the 529
5298 or 529 5300 remote alarm to the off position (down). Remove the four screws and rear panel. Replace
the fuse with the equivalent fuse shown on the label. Replace the rear cover and four screws. Turn on the
power to the 529 5298 or 529 5300 remote alarm; check the malfunctioning unit.
SERVICE
A unit that is not functioning properly should not be used. It is recommended that all servicing be done by a service
facility authorized by CONCOA. Contact CONCOA Customer Service in Virginia Beach, Virginia for systems
still covered by the warranty. For items not covered by the warranty, contact the nearest CONCOA District Sales
Office for assistance.
If so advised, the unit should be sent to a service facility authorized by CONCOA. Do the following before ship-
ping:
1. Adequately package the system. If possible package in the original shipping container.
2. Ship prepaid.
3. Include a statement of the observed deficiency.
Return trip transportation charges are to be paid by the Buyer. In all cases where the warranty has expired, repairs
will be made at current list price for the replacement part(s), plus a reasonable labor charge.
16