AnyTone ARES II Buku Petunjuk - Halaman 14
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Radio AnyTone ARES II. AnyTone ARES II 16 halaman.
Juga untuk AnyTone ARES II: Buku Petunjuk (16 halaman)
Halaman Cetak
FUNCTION MENU
1. Press and hold the [UP] key of the microphone while powering the radio ON to enter into the
radio function menu.
2. Rotate the channel switch or press the [UP/DN] key of the microphone to select the menu
function options.
3. Press the [PTT] key of the microphone to enter into the menu setting.
4. Rotate the channel switch to select the desired setting.
5. Turn the radio OFF to save and exit the radio function menu.
No.
Function
1
BEEP
2
Roger◆Beep
3
WX◆alarm
4
Dimmer
5
NPC
6
VOX◆level
7
VOX◆delay
8
Scan◆type
9
Microphone◆type
10
Fine◆freq adjust
11
Fine freq range
12
SWR◆display
13
Reset
LCD
Description
Display
Available setting: oF, 01-09 levels
Default: oF
Available◆setting:◆oF,◆01-05◆levels
Default:◆oF
Available◆setting:◆oF,◆on
Default:◆on
Available◆setting:1-3
Default:◆3
Available◆setting:◆oF,◆on. Default:◆oF◆
(NPC on is valid◆for◆AM/SSB◆modes◆only. Only use with
LOW TX Power. Adjust◆MIG to◆control◆peak TX Power)
Available◆setting:◆oF,◆01-09◆levels
Default:◆oF
Available◆setting:◆01-09◆levels
Default:◆3
Available◆setting:◆ti (time◆scan),◆Sq (squelch◆scan)
Default:◆Sq
Available◆setting:◆EL (condenser),◆dy (dynamic)
Default:◆EL
oF:◆turn◆off◆frequency◆fine◆adjustment.
r:◆ turn◆on◆fine◆adjustment◆for◆RX◆frequency only
t:◆ turn◆on◆fine◆adjustment◆for◆TX◆frequency only
rt:◆turn◆on◆fine◆adjustment◆for◆both TX/RX◆frequency
Default:◆rt◆
F1: FIN control adjustment range +/- 500Hz
F2: FIN control adjustment range +/- 5kHz
Default: F2
on:◆turn◆on◆SWR◆display
oF:◆turn◆off◆SWR◆display
Default:◆on
ALL: Move NB/ANL slide switch to OFF, press PTT to
reset ALL radio data to factory default
CHANNEL: Move NB/ANL slide switch to NB/ANL, press
PTT to reset CHANNEL data to factory default
◆
10
◆
◆