DUCTMATE Cornermatic Plus Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Industri DUCTMATE Cornermatic Plus. DUCTMATE Cornermatic Plus 7 halaman. Adjustable dual head chute retrofit

Halaman Cetak

To Load Sleeves of Corners Into the Lower Chute

Make sure that the upper head is high enough that you have room to work on loading the

lower chute.

Locate the markings on the sleeve which state LOWER DUAL HEAD (figure 24), and this

time tear off the perforated end which this arrow points to, as in figure 25.

Make sure the "trap door" in figure 26 is closed. Again, use your index finger to prevent the

corners from falling out of the sleeve, and invert the sleeve. Place this sleeve into position

as shown in figure 27. Similar as with the upper chute, strap the sleeve to the chute using

the bungee.

Allow the corners to drop into position by pulling the hook in figure 28, opening the trap door.

Your Retrofitted Cornermatic Adjustable Dual Head Machine

Figure 24

Figure 26

Charleroi, PA

Lodi, CA

210 Fifth Street

810 S. Cluff Avenue

Charleroi, PA 15022

Lodi, CA 95240-9141

800-245-3188

724-258-0500

FAX: 724-258-5494

FAX: 209-333-4678

www.ductmate.com

is Ready for Use!

Figure 25

Figure 27

Figure 28

724 - 10/13