AnyTone BT01 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mikrofon AnyTone BT01. AnyTone BT01 20 halaman. Bluetooth microphone

Halaman Cetak

You can set suitable noise reduce level to get acceptable noise and

audio effect.

Go to Menu

Reduce(RX), set the noise reduce level for receiving use,

recommend setting is level 3. Noise reduce for analog RX only.

Go to Menu

Reduce(TX), set the noise reduce level for transmit use,

recommend setting is level 3. Noise reduce for both analog TX and

digital TX.

4.12- Menu Operation

The menu operation on BT microphone is mapped from AT-

D578UV radio, the functions are fully same as AT-D578UV radio.

Bluetooth menu function as below.

BT Menu Sub menu Description

Pairing

Names

Paired

Names

OFF

BT Hold

1-30S

Time

infinite

BT RX

30ms-5.5s

Delay

Settings

Radio Set

Settings

Radio Set

Disconnects to the radio.

The BT name of BT01 microphone.

The BT name of BT device connected to the AT-

D578UV radio.

The BT01 microphone disconnects to the radio at

once when signal drops. It takes time to rebuild the

connection when new signal come in.

The BT01 microphone stays connecting to the radio

within the set time after signal drops, after the set

time dispired, the BT device will disconnect to the

radio.It takes time to rebuild the connection when

new signal come in.

The BT01 microphone stays connecting to the radio

after singal drops.It will pick up the signal at once

when new signal come in.

The radio will ignore the RX signal if the duration of

the signal does not exceed the set time. It helps to

prevent the interfere signal being heard.

Voice Func

Noise