DUDEPRUNER THE FUZZ GUN 2.0 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Otomatisasi Rumah DUDEPRUNER THE FUZZ GUN 2.0. DUDEPRUNER THE FUZZ GUN 2.0 12 halaman.

First Use

Shave the area of treatment, or use an electric trimmer with zero height blades. The closer to the skin you can get, the

better the flash will penetrate to the hair root. Do not pluck, wax or epilate the hair, as the hair root needs to be intact for

IPL to work

Clean and dry your skin completely and make sure you have no lotions or creams on. IPL doesn't need any creams or gels

for your treatment.

Spot Test

The spot test is used to determine if your skin is suitable for IPL, and to help select the best intensity level for each treatment

area.

Do a spot test on each area you intend to treat.

Setup your Fuzz Gun 2.0 on single-shot mode

Test the flash using intensity level 1 by pressing the flash button once

Move the handset to the next section of skin, increase the intensity level to 2 and repeat

Repeat this process until you reach intensity level 5, or the maximum level recommended for your skin type

The hair follicle needs to be intact for IPL to be effective. The goal is to get as much light energy to the hair-root so that

the hair is destroyed. This means shave or trim as close to the skin as possible and do not wax, pluck or epilate.

If you have sensitive skin, shave 24 hours before you intend to use your Fuzz Gun 2.0

Exfoliate before use to remove any dead skin cells. It's not essential, but it will help the light penetrate better, and your

skin will look amazing.

Moisturise afterwards. Now that you've cleared away the jungle, it's time to take pride in what lies beneath

CAUTION: Take care to not let the loose skin of your nutsack or shaft touch the glass of the flash window, as it can get

quite hot. Make sure the skin only comes in to contact with the cold silver surface of the treatment head. The best way is

to avoid pressing down hard on these areas, and try to pull the skin tight so it doesn't bunch up and touch the glass.

FIRST USE