Concord Camera Eye-Q 2133z Panduan Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Kamera Digital Concord Camera Eye-Q 2133z. Concord Camera Eye-Q 2133z 5 halaman. Concord camera eye-q 2133z: quick start
Juga untuk Concord Camera Eye-Q 2133z: Pertanyaan yang Sering Diajukan (2 halaman)

Halaman Cetak

Deleting images

Follow these instructions to delete images from the SD/MMC memory card or from the camera's internal memory. You can also delete images when connected to a PC

using the installed software. (Refer to the appropriate sections for more information.)

Deleting individual images

To delete one picture at at time, turn the Mode Dial to Playback.

Scroll through the images using the Up and Down buttons until you find

the image you would like to delete.

Press the

button to bring up the Delete Picture screen.

Press the

button to delete the current image.

Connecting to your Computer

The Digital Camera is enabled with two modes when connected to your computer; Mass Storage Device (MSD) and PC Camera. MSD mode allows you to use the

Digital Camera just like a standard storage device, copying, deleting and moving files from the camera just as you would a normal disk drive. To enable MSD mode,

first set the Mode Dial to any mode other than PC Camera, and then connect the camera to your computer using the USB cable.

PC Camera mode allows you to use the Digital Camera as a standard PC video camera, for videoconferencing, telemonitoring, or to create your own home videos.

To enable PC Camera mode, set the Mode Dial to PC Camera, and then connect the camera to your computer using the USB cable.

Transferring Photos to your Computer

Confirm that the camera is in Mass Storage mode (see above for details).

Viewing Images ~ Connecting to your TV ~

You can view the images you have taken with your camera using Video OUT by connecting the camera to your television using the included video cable.

(Image files stored in SD/MMC that were taken with other digital cameras cannot be viewed using this function.)

Connect the video cable to the Video OUT port of the camera via the

mini-jack (the small pin) and to the Video IN port on your television via

the mini-jack (the large pin).

Turn on the television and set it to the Video IN mode.

Deleting all images

To delete all of the pictures stored in your camera, turn the Mode Dial

to Setup.

Select Delete All or Format from the Setup menu on the LCD display by

pressing the

button.

Choose Yes to confirm. Format your camera's internal memory periodically

to regain storage capacity.

- To cancel this operation, select No from the Delete/Format submenu.

After connecting the camera to the PC a new "removable disk" will appear

in File Explorer. Open a subfolder within the DCIM folder and copy files to

the computer.

Turn on the camera and the pictures you have taken will be visible

on your television monitor.

Press the Setup menu Video Out option to switch to either the PAL or NTSC

system if needed.