Anyware Instruments Moodulator Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Synthesizer Anyware Instruments Moodulator. Anyware Instruments Moodulator 19 halaman.

AMPLIFIER SECTION

A voltage controlled Amplifier (VCA) is a circuit that has two inputs and one output, and basically

multiplies one input with the other. Consider it a voltage controlled attenuator, in which one input signal

level is controlled by the other, and the result of such modulation goes to the output.

An amplifier module is an essential part of a synthesizer. The most basic use is to control the final volume

of a patch, normally at the end of the audio chain, by an envelope generator. In that case the output of the

filter (or whatever the source is) goes to the "VCA IN", the envelope signal goes to the "VCA CV" input,

and the shaped sound goes to the "VCA OUT".

All this is preconnected inside the synth, so you don't have to worry about it.

MASTER (knob)

Sets the main volume of the final sound. It´s the last stage of the sound within the synth.

AMP MODE (switch)

This switch determines how the VCA will be modulated.

VEL:

The AMPLIFIER ENV controls the VCA, but its depth is controlled by MIDI Velocity.

AMP ENV:

The AMPLIFIER ENV controls the VCA.

ON:

The amplifier is not controlled by the envelope, it´s always on.