Anywave Marble PA-U-1200-D-FB Panduan Memulai Cepat - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pemancar Anywave Marble PA-U-1200-D-FB. Anywave Marble PA-U-1200-D-FB 18 halaman.

Marble 4Device Quick Start Guide

Please be sure that the Marble PA-to-Exciter serial cable is properly connected (as

shown in the above system interconnect diagram) with the RS-232-to-485 adapter

connected to the rear of the Exciter. With this cable properly connected and the PA

FREQ-TYPE set to AUTO mode (as shown in the web page screenshot below), the

PA should automatically detect the Exciter output channel frequency, display this

FREQ on its main Status webpage, and adjust its internal meter calibrations

accordingly (as the PA gain varies slightly between channels).

With the Exciter set to the desired TX Frequency, please check and be sure that the

PA displays the same channel Frequency as shown on its main status screen in the

screenshot below.

Mable 4Device Quick Start Guide, 5/19/2022

Page 10 of 18