Duerkopp Adler 195 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Mesin Jahit Duerkopp Adler 195. Duerkopp Adler 195 14 halaman.
Juga untuk Duerkopp Adler 195: Panduan Petunjuk Pengoperasian (18 halaman)

Halaman Cetak

1. General Information

1.1 Safety Notes

1.2 Machine Operation without Material

1.3 Table Tops

Special Attention!

The mains voltage and the nominal voltage listed

on the motor identification plate must be the same.

All work on the electronics is to be conducted only

by authorized personnel and with the mains plug

disconnected.

Please observe the safety instructions!

Installation is to be conducted according to the

following instructions. All necessary parts are to be

found in the enclosed package.

Attention!

First arrest the pressure foot in the open position

and set the shortest pressure foot stroke.

The cutouts in self-made table tops must have the

dimensions shown in the sketches on pages 4 and 5.

The table tops must have the necessary load

capacity and firmness.