Duerkopp Adler 506 Panduan Petunjuk Pengoperasian - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin Jahit Duerkopp Adler 506. Duerkopp Adler 506 17 halaman.
Juga untuk Duerkopp Adler 506: Panduan Petunjuk Instalasi (8 halaman)
Halaman Cetak
4. Maintenance
4.1 Cleaning
16
Caution Risk of Injury !
Turn the main switch off.
Maintenance work on the unit may only be conducted with the machine
turned off.
A clean machine protects against malfunctions !
Daily cleaning:
–
Particularly the areas around the needle thread guides and
tensions, thread controller spring and hook are to be cleaned of
sewing dust and lint accumulations (e.g. with a compressed air
gun).
For cleaning the parts attached under the foundation plate tilt the
machine head to the side.
–
Clean the motor ventilator grill 1 with a compressed air gun.
–
Check the water level in the pressure regulator.
The water level should not be allowed to rise to the filter insert 2.
After screwing in the drain screw 4 blow the water out of the water
separator 3 under pressure.
Dirt and condensation water are eliminated through the filter insert 2.
Wash out the dirty filter bowl and filter insert with naphtha after a
certain period of operation and blow clean with compressed air.
ATTENTION !
Do not use solvents for washing!
They destroy the filter bowl.
1
2
3
4