Duerkopp Adler 550-16-26 Panduan Petunjuk Pengoperasian - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin Jahit Duerkopp Adler 550-16-26. Duerkopp Adler 550-16-26 19 halaman. Sewing lamp led
Juga untuk Duerkopp Adler 550-16-26: Petunjuk Pemasangan (2 halaman), Panduan Petunjuk Pengoperasian (12 halaman)
Halaman Cetak
4.8 Changing the Needle
14
3
Caution Risk of Injury!
Turn the main switch off .
Change the needle only with the sewing machine turned off.
–
Loosen screw 1.
–
Push the new needle into the drilled hole of the needle bar 3 up to
the stop.
ATTENTION !
The furrow 2 of the needle must show to the hook point.
–
Tighten screw 1.
ATTENTION !
After a change to another needle thickness the clearance of the hook
to the needle must be corrected (see Service Instructions).
The non-observance of the above correction can lead to following
faults:
–
Change to a thinner needle: - Missing stitches
- Damage to the thread
–
Change to a thicker needle:
- Damage to the hook point
- Damage to the needle
1
2