Duerkopp Adler 577-1111 Panduan Petunjuk Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Mesin Jahit Duerkopp Adler 577-1111. Duerkopp Adler 577-1111 19 halaman.

5.5

Installing and connecting the control panel

–

Remove the designation strip 9 of the cl. 577 from the driver

package and introduce it into the control panel.

–

By using the available fastening material, fasten first the control

panel 10 to the square 11.

–

Then install the square 11, together with the control panel 10, on

the table top.

–

Lead the connecting cable of the control panel to the control box,

by passing it through the hole in the table top.

–

Introduce the plug of the control panel into the bush 12 and fasten

by a screw.

The illustration shows the rotary connection of the control panel when

using a stand for transversal/longitudinal operation.

Turning the control panel

–

Loosen the clamping lever 13.

–

Turn the control panel in the desired position.

–

Tighten clamping lever 13.