Duerkopp Adler 589 Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin Jahit Duerkopp Adler 589. Duerkopp Adler 589 13 halaman. Automatic double-chainstitch buttonholer

Halaman Cetak

Installing the machine

3.1

Adjusting the working height

3.2

Attaching the yarn stand

The working height is continuously adjustable between 85 and 120 cm

(measured to the upper edge of the table plate).

–

Undo locking screws 1 and 2 on both sides of the stand.

–

Adjust the table of the machine to the required working height.

–

Tighten locking screws 1 and 2.

–

Insert the reel stand 3 in the hole in the table plate and secure it

with the nuts and washers.

–

Fit and align the yarn-reel bracket 5 and unwinding arm 3 as

shown in the illustration.

NB: the yarn-reel holder and the unwinding arm must be vertically

in line.

–

Depending on the type of yarn reel the centring piece 6 must be

set as shown in the above illustration. Incorrect settings may lead

to faults in operation.