Duerkopp Adler 743-221 Panduan Petunjuk Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Mesin Jahit Duerkopp Adler 743-221. Duerkopp Adler 743-221 12 halaman.

5. Pneumatic Connection

ATTENTION !

For a fault-free functioning of the pneumatic control sequences, the

following notes are to be observed.

The compressed air supply must be so conceived that even at the

moment of the greatest air consumption a minimum operating pressure

of 5 bar is not fallen short of.

The connection to the compressed air supply is made with the

accessories available as optional equipment ( 0797 003031 ) or with

in-house connection material.

Operating pressure 2 = 6 bar

The blower pressure 1 must be suitable for the material.

Standard setting: approx. 3 bar

To set the pressure, lift and turn the appropriate knob.

Turn to the left

Turn to the right

= Decrease pressure

= Increase pressure