Abtus ABT 8000 Buku Petunjuk - Halaman 15

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Ukur Abtus ABT 8000. Abtus ABT 8000 16 halaman. Data logging laser height & stagger gauge

Halaman Cetak

5.0

Maintenance

5.1

User Advice

Check that the bearing surfaces that are in contact with the rail are clean and can move



freely

Ensure that the vertical beam locks firmly into place and there is no slack.



Ensure the laser window on the vertical beam and the REFOS laser unit are clear.



5.2

Every 3 Months

Visually check for damage



Ensure the vertical beam moves smoothly across the cross beam using the stagger



adjustment wheel.

5.3

Annual

To ensure the ongoing accuracy of your ABT8100, the gauge should be calibrated every



12 months. For UK users this means returning to Abtus for re-calibration and for overseas

users this means returning to your local Abtus Representative, a list of which can be found

on www.abtus.com.