Duerkopp Adler 911 Manual Petunjuk Pemasangan - Halaman 18

Jelajahi secara online atau unduh pdf Manual Petunjuk Pemasangan untuk Monitor Duerkopp Adler 911. Duerkopp Adler 911 20 halaman. Laser lamp
Juga untuk Duerkopp Adler 911: Manual Petunjuk Pemasangan (16 halaman), Manual Petunjuk Pemasangan (8 halaman), Manual Petunjuk Pemasangan (16 halaman)

Fitting Instruction for Remaining Thread Monitor

3.3 Operating and function sequence

Ausgabe/Edition:

Änderungsindex

03.2011

Rev. index: 00.0

Anbauanleitung Restfadenwächter

Teilesatz 0911 597754

Kit 0911 597754

Prerequisite:

The bobbin has to be inserted in the hook with the groove A

pointing downwards.

After the detection: "Bobbin almost empty, only certain residual

thread left":

The control panel will display the follwing: "Event code: 3220"

The request "Continue sewing" has to be confirmed with either

"OK" or "Cancel".

–

Selection "OK" (with a short segment to be sewn left):

The sewing program will be completed. After the thread

trimming the following message will appear on the display:

"Bobbin empty" / "Insert a full bobbin"

–

The regular bobbin change has to be carried out.

–

Selection "Cancel" (with long segments left to be sewn):

Thread trimming will occur; afterwards the control changes to

the repair mode.

–

The regular bobbin change has to be carried out.

–

Afterwards finish the seam segment left in repair mode.

Printed in Germany

Teile-Nr./ Part-No.:

0791 911703

Blatt:

von

Sheet: 18 from 20