Anzzi BA-LMDFX017AL Panduan Pemasangan & Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Produk Perawatan Pribadi Anzzi BA-LMDFX017AL. Anzzi BA-LMDFX017AL 8 halaman. Front & bottom lighting led mirror
Halaman CetakINSTALLATION INSTRUCTIONS
5
A
B
C
If drilling into wood, drill a 1/8" hole at each marked
location (figure A) and secure Hooks with screws. If
drilling into concrete, drill a 5/16" hole at each marked
location (figure A, B, C), insert wall plugs, and secure
Hooks with screws.
7
WIRING DETAILS
INCOMING SUPPLY
SWITCHED LIVE
EARTH(GREEN/YELLOW
SLEEVED COPPER)
NEUTRAL
Live wire
Earth wire
Hook
MIRROR WIRING
L
BLACK or LABELED - L
N
WHITE or LABELED - N
Twist-cap Connector
Neutral
wire
white wire
green
wire
LED Mirror
Cable
6
The LED mirror is provided with a power supply cord.
For the plug-in connection, hang the mirror to the Hooks
as shown. Then plug the power supply cord into the
outlet to finish the installation. For the wire connection,
please cut the power supply cord near the plug and
connect the wire by following step 7. Then secure
mirror by following step 6.
Before starting the wire connection, please make
sure the electricity supply has been turned off.
For the wire connection, please cut the power supply
cord and strip a section of sheath and insulation from
GREEN - E
the cable. Connect the neutral (N) and live (L) wires to
the mirror's power supply wires, using the Twist-cap
Connectors. Connect the mirror's green wire to the
grounding wire in the junction box with a Twist-cap
Connector. Carefully push the wires into the junction
box.
black
wire
5