Anzzi SD-AZ054-01 Series Panduan Pemasangan & Pengoperasian - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Perabotan Dalam Ruangan Anzzi SD-AZ054-01 Series. Anzzi SD-AZ054-01 Series 18 halaman. Tub door
Juga untuk Anzzi SD-AZ054-01 Series: Panduan Pemasangan & Pengoperasian (10 halaman)

Halaman Cetak

Care & Maintenance

BASES and BACK WALLS: To ensure long-lasting life for your acrylic tub and back walls

(if installed), wipe them oﬀ after each use with a soft cloth. To clean the acrylic surface, use

non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners.

Never use abrasive cleansers, metal brushes, or scrapers, as they can scratch or dull the

surface.

GLASS: To ensure long-lasting life for your glass shower products, after each use rinse

and wipe oﬀ the glass using either a soft cloth or a squeegee to prevent soap buildup

and water spots (hard water can etch the surface of the glass over time if left to dry).

To avoid damaging the surface, never use abrasive cleaners or cleaning products that

contain scouring agents. Likewise, never use bristle brushes or abrasive sponges that can

scratch the surface.

HARDWARE: To ensure a long-lasting ﬁnish, wipe oﬀ the metal parts after using with a

soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach,

or acid. If accidentally used, rinse the surface as soon as possible to prevent damage to the

ﬁnish (peeling or corrosion). After cleaning the polished ﬁnishes, rinse thoroughly and wipe

dry with a soft cloth. Clean stainless steel surfaces at least once a week. When applying

stainless steel cleaner or polish to stainless steel hardware, work with (not across) the

grain. Never use an abrasive sponge or cloth, steel wool, or wire brush, which may

permanently scratch the surfaces.

NOTE: Regularly inspect the glass and all hardware for misalignment, proper

attachment, and damage. Contact ANZZI with any questions or concerns.