Duevi DVT-LCD Panduan Instalasi dan Penggunaan - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Penggunaan untuk Panel Kontrol Duevi DVT-LCD. Duevi DVT-LCD 20 halaman.

•

Tamper

Tamper: enable/disable the keyboard tamper

Tamper

Values: YES / NO

•

Baudrate

Baudrate 19200

Baudrate

19200: set the RS485 bus communication speed to low (19200 bps) or high

19200

(38400 bps)

Values: YES / NO

•

Erase All

Erase All: Clear all settings and restore the default configuration

Erase All

•

Programming end

Programmin

g end: Exit from programming menu

Programmin

g end

To change an option, select it and press " ". To change its value, use the numeric keys or ▼ ▼ ▼ ▼ and

▲ ▲ ▲ ▲ keys.

Confirm the changes with " ".

Cancel the changes with " ".

To exit from programming select "Programming end" and press " ".

Switch DIP2

DIP2 to OFF

OFF (normal working).

DIP2

OFF

NOTE E E E : if no key is pressed for 30 seconds, the keyboard automatically exit from programming. It is

NOT

necessary to repeat steps from point 3.

(default: NO)

To exit from programming of the keyboard:

DIP2 to OFF

DIP2

OFF