Duevi EZY-LAN Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Sensor Keamanan Duevi EZY-LAN. Duevi EZY-LAN 12 halaman. Wireless alarm panel with ethernet + wi-fi + gsm + lte
Juga untuk Duevi EZY-LAN: Panduan Pengguna (4 halaman), Panduan Pengguna (5 halaman)

Halaman Cetak
13 Homepage (TEST)
By pressing the ENTER TEST button, the control
panel switches to test mode and the RGB LEDs
of the control unit flash blue.
The homepage continues to display panel
information.
13.1 TEST Menu
The test menu, accessible by pressing the icon
(double right arrow), contains the following items:
•
Test Zones
•
Test Sirens
•
Test Keyfobs
•
Test GSM
•
Test Immages
•
Test Light
•
Test Roller shutter
•
Test Gate
•
Test Irrigation
•
Test Relay
13.2 Test Zones (TEST)
On
this
page
you
transmissions of each device (apart from the
keyfobs that have a specific page).
A line will be added for each transmission
received indicating the device name, date / time,
the status of the affected zone (eg. internal
contact alarm, external contact rest, tamper
alarm, etc) and the RSSI radio level received from
the control panel.
Each new transmission will be placed at the top of
the list.
13.3 Test Sirens (TEST)
The page contains the list of radio sirens present
in the system, which can be tested individually.
Pressing the icon
available tests and the commands for starting and
stopping the test.
•
Visual test / commands only the flashing of the
siren LEDs
•
Visual + beep test / commands flashing and
low power beeps
•
Alarm test / commands High power alarm
sound
Try one siren at a time to avoid overlapping
commands.
13.4 Test Keyfobs (TEST)
On
this
page
you
transmissions of the keyfobs present in the
system.
A line will be added for each transmission
received indicating the associated user name, the
can
check
the
(info) expands the view of the
can
check
the
number of the pressed button, the operation
associated with the button and the RSSI radio
level received from the control panel.
Each new transmission will be placed at the top of
the list.
13.5 Test GSM (TEST)
On this page you can make a test call to check the
GSM operation.
Enter the telephone number to call with the
international prefix without + (eg 44345010101),
then press "Call the number".
When the receiver answers the call, the voice
message previously recorded in SETUP is played.
13.6 Test Images (TEST)
On this page you can test the video verification
devices present in the system (VIDEO-PIR or IP
cam).
Press the icon
capture request to the device.
Once the acquisition is finished (the time varies
according to the distance and the device) the
captured image will be displayed.
radio
13.7 Test Outputs (TEST)
In these pages it is possible to carry out a test in
real time of the single available outputs, sending
commands and displaying their status.
radio
(photocamera) to send a