Anzzi Envo WH-AZ018-M3 Panduan Pemasangan & Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pemasangan & Pengoperasian untuk Pemanas Air Anzzi Envo WH-AZ018-M3. Anzzi Envo WH-AZ018-M3 20 halaman. Electric instant water heater
Halaman Cetak
INSTALLATION
Step 1:
Remove the bracket from the appliance
by loosing the screw in the middle of the
bottom.
Step 3:
If screw locations are not in stud. Drilling
three 0.24''(6mm) diameter holes on the
wall. Insert the plastic anchors into the
holes. If screw locations are in wall stud,
please skip to step 4.
Step 2:
1.Locate installation position for the water
heater.
2.Place the bracket on wall and use pencil
to mark screw hole locations. Make sure
the outlet and inlet pointed downward
vertically.
Step 4:
Place the bracket onto the wall and drive
mounting screws directly into stud or plastic
anchors to secure it.
PG.9