Cascade 150K Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Forklift Cascade 150K. Cascade 150K 20 halaman. Fork positioner/sideshifter
Juga untuk Cascade 150K: Panduan Petunjuk Instalasi (10 halaman)

Halaman Cetak

ERIODIC MAINTENANCE

2000-Hour

After 2000 hours of truck operation, in addition to the

100, 300 and 1000-hour maintenance, forks in use shall

be inspected at intervals of not more than 12 months

(for single shift operations) or whenever any defect or

permanent deformation is detected. Severe applications

will require more frequent inspection.

Fork inspection shall be carried out by trained personnel

to detect any damage that might impair safe use. Any fork

that is defective shall be removed from service. Reference

ANSI B56.1-2005.

Inspect for the following defects:

• Surface cracks

• Straightness of blade and shank

• Fork angle

• Difference in height of fork tips

• Positioning lock

• Wear on fork blade and shank

• Wear on fork hooks

• Legibility of marking

NOTE: Fork Safety Kit 3014162 contains wear calipers,

inspection sheets and safety poster. Also available

is fork hook & carriage wear gauge 209560 (Class II),

209561 (Class III) and 6104118 (Class IV).

6055911-R8 EN